Space News space history and artifacts articles Messages space history discussion forums Sightings worldwide astronaut appearances Resources selected space history documents


                  arrow advertisements

Mock shuttle Pathfinder restored atop its stack at rocket center

August 28, 2024

— Pathfinder is back in its "space," three and a half years after it "landed" on Earth.

An early mockup of NASA's now-retired winged orbiters, Pathfinder was returned to its position atop a space shuttle propulsion "stack" at the U.S. Space & Rocket Center in Huntsville, Alabama on Wednesday morning (Aug. 28). The lift signaled the nearing completion of a multi-million-dollar restoration effort.

"Returning Pathfinder to the shuttle stack after an extensive restoration process is a major milestone for us," Kimberly Robinson, CEO and executive director of the Space & Rocket Center, said in a statement provided to collectSPACE. "We are so fortunate to have this emblem of a program that for 30 years and 135 flights helped launch telescopes and satellites and build the International Space Station."

Workers using two heavy-lift cranes raised Pathfinder — absent its wings and main engines — 80 feet (24 meters) off the ground to its mount atop an external fuel tank and twin solid rocket boosters. The horizontal display, which is at a 10-degree angle so Pathfinder appears to be climbing skyward, is one of only two such full-stack displays in the world (the other at the California Science Center in Los Angeles features space shuttle Endeavour).

Pathfinder's wings are set to be installed on Thursday, followed by its engines on Friday, weather permitting. In total, the cranes will have lifted more than 143 tons to reassemble the orbiter atop its stack.


Pathfinder orbiter lift. Click to enlarge video in new pop-up window. (USSRC)

Pathfinder was originally built in 1977 to verify that NASA's ground support equipment was ready to receive the flight-worthy spacecraft. Comprised of a steel airframe covered in wood panels, it lacked the details and markings that would later make the flown vehicles iconic.

After its use by NASA, Pathfinder was modified by the America-Japan Society so that it looked more like the orbiters that had subsequently launched into space. Pathfinder went on display as part of the "Great Space Shuttle Exposition" in Tokyo from 1983 to 1984, before finding a permanent home at the U.S. Space & Rocket Center, home to U.S. Space Camp, in May 1988.

Pathfinder was mated with the first propulsion test article for the shuttle's external tank and two prototype solid rocket boosters. It was also outfitted with engine nozzles, two of which were were flight hardware. Nozzle 2005 flew on the first five flights of the space shuttle Columbia and nozzle 2020 was used on Challenger's fifth through ninth launch. (The third nozzle was a development unit.)

In February 2021, funded in part by a $500,000 Save America's Treasures grant, the rocket center began work on the restoration of Pathfinder and its Shuttle Plaza display. The orbiter was lowered to the ground and stripped to just its original red airframe, while work got underway to repair and repaint the tank and boosters.

Pathfinder was returned to its original length — 121 feet (37 meters) from its nose to vertical stabilizer tip — after being truncated for its display in Japan. Its frame was reinforced with cold-formed steel to accommodate 516 3D-printed panels that in turn were painted, adding the vehicle's exterior details.

"It is the perfect representation of our rich history," said Robinson. "The 3-D printed panels that now cover the orbiter merge that history with technologies of today, creating a full circle story we're proud to tell."

Pathfinder was reattached to its external tank using eight 0.625-inch (1.6 cm) bolts and nuts at the front and two 2.5-inch diameter (6.3 cm) bolts, nuts and washers at the rear. Teflon bearings were used on the rear attachments to ease movement. Each wing will require 32 fasteners, while each of the engine nozzles will use 80.

Pathfinder's lift was the last remaining piece needed to restore the rocket center's "spaceline" after work was completed to repair, repaint and re-stand up the historic boosters in the center's rocket park. Several more months of work is needed before Shuttle Plaza will reopen. A ribbon cutting is tentatively planned for this fall.

 


The mock space shuttle orbiter Pathfinder is seen atop its external tank and boosters after a mutli-year, multi-million dollar restoration effort at the U.S. Space & Rocket Center in Alabama. (USSRC)



The space shuttle orbiter simulator, later named Pathfinder, being used in a fit-check test for the Mate/Demate Device at the Kennedy Space Center's Shuttle Landing Facility in Florida in 1978. (NASA)



After being lowered to the ground in 2021, Pathfinder was stripped of its wooden panels, exposing its original red airframe. (USSRC)



As part of its restoration, Pathfinder was outfitted with 516 new 3D-printed panels that were then painted to add details. (USSRC)



Two large cranes lift the restored Pathfinder above the mock space shuttle orbiter's external tank and solid rocket boosters before mating the "stack" at the U.S. Space & Rocket Center in Huntsville, Alabama on Wednesday, Aug. 28, 2024. (U.S. Space & Rocket Center)

Update for Thursday, Aug. 29, 2024:



A crane is used to lift Pathfinder's left wing into place for its installation on the mock orbiter, Thursday, Aug. 29, 2024. (U.S. Space & Rocket Center)



Pathfinder as seen after the installation of its right wing at the U.S. Space & Rocket Center on Thursday, Aug. 29, 2024. (U.S. Space & Rocket Center)



Both the left and right wings are seen reattached to the mock shuttle orbiter Pathfinder on Thursday, Aug. 29, 2024. (U.S. Space & Rocket Center)

Update for Friday, Aug. 30, 2024:



The second of three authentic space shuttle main engine nozzles is installed on the mock orbiter Pathfinder on Friday, Aug. 30, 2024. The one already installed (lower right) was flown on space shuttle Columbia's first five flights, STS-1 through STS-5. The nozzle being installed in the lower left position flew on the space shuttle Challenger on missions STS-41C, STS-41G, STS-51B and STS-51F. (U.S. Space & Rocket Center)



All three space shuttle main engine nozzles are seen installed on Pathfinder, marking the end of the lift, Aug. 30 2024. (U.S. Space & Rocket Center)

back to collectSPACE
© 1999-2024 collectSPACE. All rights reserved.